Are you living with a water-damaged mobile phone and looking for experts like a phone repair shop in Ottawa? Are you facing difficulties in completing your daily task? Well, we got your back and now you can remove water from your mobile phone without any expert by following the 8 amazing steps. However, these 8 steps will save your money from the frequent phone repairing system. So, let’s start this topic without further ado. 

8 Steps for Removing Water from Your Phone

  1. First, you have to remove your mobile phone from the water immediately because the longer it will stay in the water, the longer you’ll face issues. 
  2. Leave the phone for some hours and turn off your phone too. 
  3. If you have any protective case on your phone, you should remove it as soon as possible. 
  4. If you can remove the backside of your phone, then you must try to remove the battery and SIM card including the microSD card. If you don’t know how to remove the SIM card, you can get help from the cell phone repair shop in Ottawa
  5. Now, use the piece of a dry cloth and try to remove the water particles from your phone. It is important to note that you should avoid rubbing your phone while drying water because if you do so, you can accidentally push the liquid into the sensitive part of your phone. 
  6. If your phone consumed a lot of water, you can use the vacuum around the phone’s crease for removing more water from your device. 
  7. It is good to avoid keeping your phone in the sun because the excessive heat will help in the water absorption. You must keep your phone in a cool place and let it dry. 
  8. You can use the bag of rice for drying the water and then leave it for 3 to 4 hours. Now, switch on your phone and check whether it is working properly or not. 

Signs of a Water-Damaged Mobile Phones 

These are the significant signs which tells your phone is water-damaged: 

  • You will see the evaporation on the phone screen. 
  • Also, you can see the corrosion marks on the ports of your phone.  
  • You can also check the liquid damage indicator which is usually located in the headphones jack, and battery compartments. You’ll find it maroon if your phone is water-damaged. 

Can Rice Fix the Water-Damaged Phones? 

According to the phone repair shop in Ottawa, rice plays a vital role in drying water within your mobile phone. This strategy, however, does not work properly but it can help you in releasing the extra water from your device. Interestingly, keeping your phone in the rice can resolve your other issues, for instance, your phone will catch a low amount of dust or any dry scratch. It equally contributed to removing water from the charging ports, and speaker of your phone.  

Is It Possible to Blow-Dry a Water-Damaged Phone? 

It is good to avoid such hacks at your home because the experts at the cell phone repair shop never recommend such activities with your phone. Blow dry has more heat and it can remove the moisture from the surface of the phone. It means that removing the water through the blow dryer can is equal to removing the moisture from your device. The excess heat can damage the other internal components of the phone too. 

Method for Drying the Water from a Charging Port. 

Let’s discuss the steps for drying the water from the charging ports of your mobile phone without contacting the Mobile Doctor repair experts:

  • First, turn off your mobile phone or if your phone is in the case, you can remove it before starting the procedure. 
  • Now, remove the mobile phone’s battery. 
  • Grab the absorbent towel and start drying the device. 
  • You can use the compressed air for removing the excessive amount of water but be careful during the whole process. 
  • Now, let it dry and keep the port’s face open in the downward position. 

How Can You Remove Water from the Phone Speaker? 

This last section will discuss the important point because every mobile phone user finds the solution for removing the water from the phone speaker. Here are some tips for removing the water from the phone speakers professionally: 

  • First, you must have a piece of cotton and swab the cotton around the area of the speaker. 
  • Your phone should be turned off when you are performing this procedure and your speaker should be placed in the downward position. This is the best way to remove the excess water from the speaker quickly. 
  • If still, you are not getting the expected results, you can hire the technicians like a phone repair shop in Ottawa. 
  • Read also more information

LEAVE A REPLY

Please enter your comment!
Please enter your name here